Very knowledgeable and highly efficient.
Overall Experience
Quality
Price
Convenience
Genny did an excellent job on my pool pump she show up on time even moved appointments around to make sure she could get the work done as soon as possible for me
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Genny Ginger show up during the arranged time and explained to me what needed to be done to get the switch operational again. Genny advised me of the cost did the work and now everything works. Genny provided excellent service
Overall Experience
Quality
Price
Convenience
Prompt and great customer service! Highly recommend.
Overall Experience
Quality
Price
Convenience
I solicited 3 estimates from reputable liscensed electricians personally referred to me by other property owners. Your estimate was 3 - 5 times the cost of the other estimates! This was apparently partly because your technician required installing a new box that both of the other electricians say is NOT necessary. As an older woman it really feels as though you are trying to take advantage of me.
Response from Haas & Sons Electric Inc.:
We appreciate the opportunity to assist you. You contacted us regarding a power outage and requested a quote for installing a line for a 240V stove. We discovered that a GFCI had tripped, which we reset, restoring power. As per your requests, you wanted to switch from a gas stove to an electric one, install a surge protector, and have the option to add another washer/dryer in the future. Your existing electrical panel is completely full and cannot accommodate additional circuits. If someone else has suggested they could add the stove circuit to your panel, they are not adhering to our national code and safety standards, and I urge you to have them obtain a permit for their work. Our quote is higher because we perform the work properly, allowing for the future expansion you wanted and protecting your home with the surge protector you requested.
Overall Experience
Quality
Price
Convenience
Dennis took the time to explain the work in detail and was very patient and professional. Highly recommend!
Overall Experience
Quality
Price
Convenience
Michael was very nice & helpful. He explained what needed to be done in terms anyone could understand. I did not expect same day service. That was a big plus. I didn't have to find time for a second visit. I would highly recommend your company to anyone needed electric service.
Overall Experience
Quality
Price
Convenience
It has been quite a while since I needed an electrician and like everything else the cost for reliable/quality work has gone up. I'm glad I had it done but the cost was more than I expected. However, it was necessary and Michael did an excellent job. I recommend the company, the excellent technicians and the superior service just plan on the cost in the budget.
Overall Experience
Quality
Price
Convenience
Very pleased with our experience. Had an electrical issue one evening and was able to get service the next day! Highly recommend!
Overall Experience
Quality
Price
Convenience
Haas and Sons once again proved why they are the only electric company we’ll use. Josh and Tyler were fantastic!! The quality of work, great service, and awesome staff make Haas and Sons really stand out in their field. Thank you for another wonderful experience!!
Overall Experience
Quality
Price
Convenience
Little on the expensive side but a great job. Customer service is awesome.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Michael offered timely, experienced and helpful service while completing several small tasks and offering estimates for potential additional services. Top notch electrician!
Overall Experience
Quality
Price
Convenience
This solution includes the installation of arc fault breakers for 2 basement 120V circuits, updates to grounding and bonding and repairs for the open air splice. In addition we shall complete the rough in of the 9 receptacles and 2 switches.
Install new 12 gauge wire from garage to post light inside PVC. The reason for today’s visit was to assess the garage lights and post light still tripping the breaker. After assessing the issue, we were able to determine that the line going from the garage out to the post is causing the breaker to trip due to bleeding voltage underground. In order to remedy this issue we will be directional boarding a new PVC line from the garage sidewall over to the post location and installing a new line inside. 12/3 Returned today and completed the new line to the post light. We installed PVC from the existing LB on the side of the garage through the ground over to the existing post light. We installed a new 12 two UF underground feeder cable straight from the panel into the existing light and wired. Once completed, we turned everything on and it is working as it should. Nick 410.301.5485
Replace front gfci The reason for today’s visit was to assess power loss to the front GFCI that the Christmas lights are plugged into. We arrived at Home. Customer had their Christmas lights plugged into the front receptacle however, none of them were working. We tested power and tried to reset the GFCI, however it would not reset. We went around Home check in the other GFCI‘s to see if they may be controlled this receptacle however none did. We were able to determine that this is a dedicated 20 of circuits that is not on with any of the other ones. We also found that the GFCI itself had gone bad so we recommend replacing and installing a new in use cover to properly protect devices when plugged in. Customer agreed so he went ahead and replaced it. Once we plugged in the Christmas lights, they turned back on however the middle strand did not. The lights before this strand and the lights after it are working, however there is an issue with these middle lights so they will need to be rep
This solution includes the installation of 2 new attic fans and installation of a customer supplied light fixture in closet. In addition we shall install gfci protection at washing machine. We have replaced the existing receptacle at washer with a gfci, installed new closet light. We shall return November 10th to install the attic fans. 11/10 Return today and replace the back attic fan. We will need a return date to come back to install the side one once we have a second pitch hopper. 11/18 Returned today and installed 2nd fan
This solution includes the replacement of 7 light fixtures, 4 inside and 3 exterior. Lastly we shall replace the damaged switch at stairs. We have replaced the 7 existing fixtures and have replaced the damaged switch at stairs.
This solution includes the repair of the existing circuits. We have restored power to the pier receptacles.
This solution includes the replacement of the damaged breaker. We have replaced the existing damaged breaker controlling the dryer circuit.
We have delivered pricing regarding the installation of a dedicated 240v EV circuit.
Referred customer to an insulation audit company
This solution includes the replacement of the original receptacles and bonding at water heater. Lastly we shall replace two existing bath fans with new customer supplied units. We have installed the new customer supplied bath fans in the master bathroom. We have also begun to replace the home’s receptacles. We shall return Friday the 12th to continue. We have vented the bath fan to the soffit area and replaced all receptacles on second and first floor. We shall return the 20th of October to complete the scheduled work. We have completed the replacement of all original receptacles in the home.
We have delivered pricing regarding the installation of light fixtures in the front living room.
This solution includes the installation of a new customer supplied fixture in the foyer area. We have installed the new foyer light.
- Replacement of an exterior light fixture.
We have provided pricing for several panel repairs. We found the wiring and fixture working, the LED driver had failed in the old bulb.
We will be returning on September 1, which is next Tuesday to install a new dedicated circuit to the flagpole receptacle Install new dedicated 20 amp circuit with GFCI protection at the subpanel. New circuit will be ran from the subpanel at the beginning of the pier out to the right corner of the bump out where the flagpole is located. We will install new PVC and conduit underneath of the pier all the way from the panel to the new receptacle Today we returned and ran the new dedicated circuit from the subpanel at the beginning of the pier out to the receptacle on the far right corner next to the flagpole. We installed all new PVC under the pier from the panel out to the new receptacle and install a new receptacle with a new in use cover. The new device has a GFCI Breaker in the far right slot in the subpanel.